givemethebighammer
|
| posted on 13/6/09 at 08:17 PM |
|
|
Peugeot Wheels - few questions
I picked these up (well actually hobzy picked them up for me - thanks for that)
Peugeot 405 Mi16 Alloys and new 195/45/15 tyres
Marked 6Jx15 CH4-29, which indicates ET29 (Peugeot forums seem to support this).
Couple of questions
Where can I get:
1. Some reasonable priced spigot rings (65.1 - 63.5)
2. Some 65mm wheel centre (preferably blank) or has someone got some old ones I could sand the logos off and repaint ?)
3. Do I need special wheel nuts for these, my other set of wheels uses these Rally Design ones:
Wheels Nuts - 12mm 1.5 19mm (3/4" HEX 60º (SN41)
thanks
 
Rescued attachment wheels.jpg
|
|
|
|
|
givemethebighammer
|
| posted on 13/6/09 at 08:22 PM |
|
|
Few of my questions answered here:
http://www.locostbuilders.co.uk/viewthread.php?tid=26931
One by myself lol 
[Edited on 13/6/09 by givemethebighammer]
|
|
|
Marcus
|
| posted on 14/6/09 at 06:28 PM |
|
|
I'm using those very wheels 
They have 60° nut tapers so standard Ford nuts will suffice. I've used 10mm spacers as these wheels are ET29, bringing the offset back to 19,
ideal for Escort running gear.
IMO there's no need for spigot rings, I've never used them and my car has done over 10000 miles in 5 years.
As for centres, I've been a bit cheeky and used Revolution centres, bought for a quid each from Newark show a couple of years ago. (well they do
look a bit like revolutions )
Marcus
Because kits are for girls!!
|
|
|
givemethebighammer
|
| posted on 14/6/09 at 08:11 PM |
|
|
Cheers Marcus
I'll have to keep my eyes open for Revolution centre caps.
|
|
|
