david cromie
|
| posted on 14/4/04 at 10:50 PM |
|
|
Centre Air corrector.
Could someone outthere have a picture of the centre air corrector on the Fireblade carb 1993 model. I have rejetted and have to close this corrector
,just not sure which one it is. David
|
|
|
|
|
alister667
|
| posted on 15/4/04 at 08:38 PM |
|
|
Mine was a 1999 and was done for me, but as I remember it there were a total of 4 'holes' - there were 3 in a row and one off to one side
- the one that was blocked on mine was the centre of the 3 in a row.
I hope someone else can confirm this or even better has a picture.
I used a small rivet (with the flange removed) cut down and dabbed with sikaflex. This meant it couldn't fall down the hole (the
'head' of the rivet prevents it) and the Sikaflex held it in place.
http://members.lycos.co.uk/alister667/
|
|
|
david cromie
|
| posted on 16/4/04 at 12:19 AM |
|
|
Air corrector
Tks Alister, that is the one I believe too. david
|
|
|
