Lars
|
| posted on 12/9/10 at 08:08 AM |
|
|
lots for sale (lots for zetec)
I have the following for sales following day 1 of my clear out (can't wait for day 2)
set of unused ARP conrod bolts, part number 151-6003, for black top zetec. Opened only to confirm fit, which they do £40
set of new blacktop head bolts, bought from Burtons £10
1.8 blacktop flywheel (much lighter than the 2.0 one) £20
sold subject to payment2.0 blacktop head complete with valves, cams, and covers. (note there is some light surface rust on the cams, but it
seems to just rub of when you go over it with your fingers £20 (collection only)
sold subject to payment2.0 blacktop engine block with pistons, crank, rods, flywheel, etc, all still attached. £20 (collection only)
1 sold subject to payment2x blacktop two part sumps with pick up. One is 1.8 and one 2.0, appear to be the same part though/ £10 each
sold subject to payment2x coilpack mounts and 2x coilpacks (one looking newish and comes with leads) I accumulated them with other parts. £10
for all
throttle body, black top £5
original 2.0 blacktop starter motor £5
accelerator pedal £20
 
soldcut-off switch unused £3
soldnumber plate surround unused £3
exhaust clamps unused 2 3/8 £3 for both
exhaust flexi 2”, 10cm long £3
cosworth amal valve £10
flexible coolant hose 68 cm long, diameter stated as 1.25" to 1.375" £10
soldset of stamps £5
sold2x temp sensors from GSXR airbox, I use these with MS £3 each
sold3m+ red vacuum tube 4mm £3
let me know what you want an I will price postage, unless of course you want to collect.
Lars
[Edited on 13/9/10 by Lars]
[Edited on 13/9/10 by Lars]
[Edited on 13/9/10 by Lars]
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
Pezza
|
| posted on 12/9/10 at 08:27 AM |
|
|
I'll take the stamps and the numberplate surround please 
Ben
You couldn't pwn your way out of a wet paper bag, with "PWN ME!!" written on it, from the "pwned take-away" which originally contained one
portion of chicken tikka pwnsala and the obligatory free pwnpadom.
|
|
|
MakeEverything
|
| posted on 12/9/10 at 09:44 AM |
|
|
Ill take the vacuum hose and temp senders please. Will U2U my email address.
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
|
David_17
|
| posted on 12/9/10 at 06:34 PM |
|
|
Does the thermostat housing have the coolant sensor? Cracked mine yesterday. u2u me a price posted. cheers
|
|
|
lotusmadandy
|
| posted on 12/9/10 at 06:47 PM |
|
|
Why is it all the 2.0 zetecs that come up for sale for a good price are miles away.
GRRRRRR
Andy
|
|
|
Krismc
|
| posted on 12/9/10 at 07:45 PM |
|
|
I wanted this head mate, but with postage seals etc it was cheaper for new block - id have the lot if he lived closer
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
coozer
|
| posted on 12/9/10 at 08:51 PM |
|
|
I'll take the coil packs and brackets. u2u sent.
1972 V8 Jago
1980 Z750
|
|
|
Lars
|
| posted on 13/9/10 at 09:13 AM |
|
|
For any one living north (ish).
I will be travelling up to Leeds sunday 26th eve for 2 days.
So would be happy to take the engine with me.
Lars
|
|
|
femster87
|
| posted on 13/9/10 at 09:33 AM |
|
|
hiya mate, am close to leeds. so i'll take the zetec and sump. u2u sent
[Edited on 13/9/10 by femster87]
[Edited on 13/9/10 by femster87]
|
|
|
AndyW
|
| posted on 14/9/10 at 06:30 PM |
|
|
u2u re head bolts
|
|
|
spikemooner
|
| posted on 20/9/10 at 03:13 PM |
|
|
Hi, are the ARP Con Rod Bolts still available? Thanks.
|
|
|
smac
|
| posted on 21/9/10 at 06:01 PM |
|
|
Ill take one of the sumps and the coolant hose. Can you bring them to Leeds with you?
Simon
|
|
|
FatChapChipChop
|
| posted on 4/10/10 at 11:31 AM |
|
|
U2U sent re: 1.8 Flywheel
Drive fast, don't look back!
|
|
|
