nick-york
|
posted on 3/4/11 at 10:34 AM |
|
|
p clips
Hi ! What is the best iva friendly way of securing p clips to the transmission tunnel sides please ?
|
|
|
chicade
|
posted on 3/4/11 at 10:44 AM |
|
|
pop rivet nice and neat
|
|
carlknight1982
|
posted on 3/4/11 at 11:01 AM |
|
|
I ran an alu strip down the tranny tunnel and then rivetted to that to get the correct spacing.
also remember to keep your fuel and wirirng seperate.
take a peek at My Blog look at the very bottom image
Logic will get you from a A to B
Imagination will take you everywhere.
|
|
omega 24 v6
|
posted on 3/4/11 at 12:23 PM |
|
|
Rivnuts then all can be removed /replaced at any time avoiding rivet ends in the tubes.
If it looks wrong it probably is wrong.
|
|
nick-york
|
posted on 3/4/11 at 06:34 PM |
|
|
Cheers everyone !
|
|