1.6cvh head torgue settings

Not logged in [Login - Register]

LocostBuilders » Forum » Engine & Transmission » 1.6cvh head torgue settings

MIG Welders & ARC Welders at MachineMart.co.uk

Printable Version | Subscribe | Add to Favourites

makoto

Contributor

Posts 69
Registered 13/7/10
Location Liverpool, Merseyside
Member Is Offline

Photo Archive Go!

Building:

posted on 30/6/11 at 07:49 PM

1.6cvh head torgue settings

Folks,

Can any help with the torgue settings for the cylinder head bolts on the 1.6cvh please?

Thanks

Myke 2463

Contributor

Posts 848
Registered 26/2/05
Location Sutton Bridge, Linc's
Member Is Offline

Building: Built Zetec powered LOCOST

posted on 30/6/11 at 08:21 PM

Haynes Manual 1.6 cvh

stage 1 30Nm 22 lbf ft
stage 2 50Nm 37 lbf ft
stage 3 Angle-tighten a further 90deg
stage 4 Angle-tighten a further 90deg

Be Lucky Mike.

LocostBuilders » Forum » Engine & Transmission » 1.6cvh head torgue settings

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.