Trollyjack
|
posted on 15/1/15 at 01:27 PM |
|
|
cnc kit
Hi
I am testing the water to if anyone would be interested in my project that Has not progressed now for 2 years.
I started building a cnc table with 3 axis.
I sold the table and am left with stepper drivers and charge pump all built into a control box which also has its power supply for the stepper
motors.
I have i think 5 or 6 stepper motors which i am not sure on the full tech but are quite a decent size.
I have had all this linked up to a pc and working using mach 3 software.
The pc would go with the kit.
Can be seen working. Paid over £400 for the bits but not wanting that much as i need space and ££
I stopped progressing this when i started building my locost
Now going to race it.
Anyone interested let me know
Thanks
[Edited on 15/1/15 by Trollyjack]
TrollyJack
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
AdrianH
|
posted on 15/1/15 at 08:44 PM |
|
|
Give me a U2u if you wish to say what you have, any pics/specs and a cost
Adrian
Why do I have to make the tools to finish the job? More time then money.
|
|
Trollyjack
|
posted on 17/1/15 at 08:48 PM |
|
|
Sold
TrollyJack
|
|