the_big_1
|
| posted on 14/5/21 at 05:39 PM |
|
|
Zetec ECU Rev Counter Signal
Hi guys
Does anyone know what the output is on the Zetec ecu, pin 48??
Cheers!!!
|
|
|
|
|
big_wasa
|
| posted on 14/5/21 at 09:29 PM |
|
|
What ecu code ? Latter canbus ecu’s don’t have one.
|
|
|
the_big_1
|
| posted on 15/5/21 at 08:47 AM |
|
|
Hi ya,
Is from 1997 Mondeo, LANN I think it was.
Cheers!!
|
|
|
big_wasa
|
| posted on 15/5/21 at 10:32 AM |
|
|
Yeh should be pin 48 a white wire with no trace.
|
|
|
the_big_1
|
| posted on 15/5/21 at 10:53 AM |
|
|
Hi ya,
Any idea what the output is, pulse or frequency or sign wave etc?
|
|
|
big_wasa
|
| posted on 15/5/21 at 11:21 AM |
|
|
Nope, I’ve never looked.
|
|
|
tims31
|
| posted on 17/5/21 at 09:48 PM |
|
|
quote:
Originally posted by the_big_1
Hi ya,
Any idea what the output is, pulse or frequency or sign wave etc?
I think it may be pulse although not certain. I have the Pin 48 from the ECU connected to my Acewell Digidash 7659 and that reads the signal just
fine. The manual for this states CDI or ignition coil signal.
Hope that helps.
Build: http://www.martinsfurybuild.co.uk/
|
|
|
the_big_1
|
| posted on 23/5/21 at 05:05 PM |
|
|
Hi guys,
Just to let you know, it is a negative pulse, 2 pulses per engine revolution
|
|
|
