Reverse Gear - Bolt onto front sprocket - chain drive cars - EXPRESSIONS OF INTEREST
Hello all,
I have developed a bolt on gear that goes onto RK sprockets. Current it can fit on 15, 16 and 17 RK sprockets, and is currently suited for the
'08 R1. With development on a '11 R1 just about finished.
See images and video link.
It is made from 17-4PH Stainless steel and is tough and hard as all hell. I have used it a fair bit with no issues.
This design bolts directly to the front sprocket, as to not interfere with the sprocket retaining nut. It suits different size RK sprockets so makes
ratio changes easy. Size wise, its the biggest I can fit into the space in the R1.
I was wondering if there is any interest out there in selling them? Price wise, ill have to confirm.
Could also develop for other engines if the interest is there, most likely would be the busa - but would need people to commit before finalizing
development
https://youtube.com/shorts/6dBGg2VLdNQ?feature=share
https://youtube.com/shorts/Q7_pgXFH_K8?feature=share
https://youtu.be/Zcqo5ArfnYw
https://flic.kr/p/2qvqeQW
https://flic.kr/p/2qvoLh4
https://flic.kr/p/2qvoLgs
https://flic.kr/p/2qvoLh9
https://flic.kr/p/2qvjo2S
https://flic.kr/p/2qvr7gT
https://flic.kr/p/2qvr7gC
https://flic.kr/p/2qvjo4q
[Edited on 20/11/24 by woodsy144]
|
