NS Dev
|
| posted on 31/10/06 at 09:55 AM |
|
|
decent mini bodyshell
decent mini bodyshell wanted.
Outer panels must be good apart from front end. Floors can be rough as they will be going as will boot floor, rear bulkhead etc.
needs solid a posts.
My other mini turned out to be not good enough so need another before i end up using a cinquecento instead
either that or has anybody got a fiat 126 and a load of spare panels...........that would be fum with 2 rsv mille's in it!!
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
|
|
donut
|
| posted on 31/10/06 at 12:01 PM |
|
|
<------ You're not having mine!!! it's far too good!! 
Actually it is really solid!
Andy
When I die, I want to go peacefully like my Grandfather did, in his sleep -- not screaming, like the passengers in his car.
http://www.flickr.com/photos/andywest1/
|
|
|
wyatt
|
| posted on 31/10/06 at 12:14 PM |
|
|
http://cgi.ebay.co.uk/Mini-bodyshell_W0QQi
temZ260045885907QQihZ016QQcategoryZ43123QQrdZ1QQcmdZViewItem
saw this on ebay might be of use
www.bynxy.co.uk
|
|
|
NS Dev
|
| posted on 2/11/06 at 09:47 AM |
|
|
bttt.
anybody??
(that one on ebay was too pricey for what it was)
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
Syd Bridge
|
| posted on 2/11/06 at 10:39 AM |
|
|
I've got two in the back yard. Take your choice. Complete
Free!!!
Cheers,
Syd.
|
|
|
NS Dev
|
| posted on 2/11/06 at 10:59 AM |
|
|
what sort of state are the shells in rot-wise?
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
JamJah
|
| posted on 3/11/06 at 11:19 AM |
|
|
Look at a location before asking?
|
|
|
