Blue Fox
|
| posted on 13/6/08 at 03:55 PM |
|
|
Fitting Sierra Pedal Box
I have a standard Ron Chapman chassis and have been trying to figure out how to fit a sierra pedal box to the footwell. Do I have to make up a
bracket as it seems at the wrong angle if mounted vertical and cut the pedals down as they seem to rub on the floor? Any suggestions of what you have
all done with photos would be even better. I expect there is something obvious that I am missing!!
|
|
|
|
|
scoop
|
| posted on 13/6/08 at 08:15 PM |
|
|
If you let me have your email i can send you some pics of mine. I can never upload any pics onto my archive.Yes you need a bracket and you need to
strengthen the pedal box itself to stop it from flexing.
Steve
|
|
|
Mark Allanson
|
| posted on 14/6/08 at 08:09 AM |
|
|
An early shot, but you get the idea
 
Rescued attachment Pedals.jpg
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
|
Mark Allanson
|
| posted on 14/6/08 at 08:19 AM |
|
|
..and finished
 
Rescued attachment Engine Overhead2.jpg
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
|
Schrodinger
|
| posted on 15/6/08 at 08:12 AM |
|
|
Mark
I can't see any reinforcing from the top of the plate to the chassis, if you have none you will be surprised at the flex when you hit the brakes
and that will be a SVA fail (guess how I know)
Keith
Aviemore
|
|
|
Mark Allanson
|
| posted on 15/6/08 at 02:41 PM |
|
|
Ahaa... just trying to catch you out, this is finished but without the covers
 
Rescued attachment BrakePedals&Cylinder.JPG
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
|
