Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: MX-5 Hub Nut Dust Caps
micksalt

posted on 26/8/15 at 01:10 PM Reply With Quote
MX-5 Hub Nut Dust Caps

So far, I've had no problems finding sources for the parts I need to restore the MX-5 bits going into my Vortx. However, the dust caps (Mazda Part B455-26-071) that prevent dust ingress into the hub nut and wheel bearing are proving very tricky to find in the UK. Any ideas where I might find these?

Thanks in advance.

View User's Profile View All Posts By User U2U Member
prawnabie

posted on 26/8/15 at 01:28 PM Reply With Quote
autolink?
View User's Profile View All Posts By User U2U Member
micksalt

posted on 26/8/15 at 01:31 PM Reply With Quote
quote:
Originally posted by prawnabie
autolink?


They've served me well for a lot of bits, but not these. I wonder if it's just a case of measuring the aperture and ordering generic grease caps?

View User's Profile View All Posts By User U2U Member
Slimy38

posted on 26/8/15 at 01:32 PM Reply With Quote
Hmm, this post made me think about my donor... I didn't have dust caps on any of the hubs!!
View User's Profile View All Posts By User U2U Member
rash12

posted on 26/8/15 at 01:35 PM Reply With Quote
try living 3000.co.uk says theres some on there ?
View User's Profile View All Posts By User U2U Member
micksalt

posted on 26/8/15 at 01:40 PM Reply With Quote
quote:
Originally posted by rash12
try living 3000.co.uk says theres some on there ?


Is that http://www.living3000.co.uk/ ? What search terms did you use?

View User's Profile View All Posts By User U2U Member
micksalt

posted on 26/8/15 at 01:42 PM Reply With Quote
quote:
Originally posted by Slimy38
Hmm, this post made me think about my donor... I didn't have dust caps on any of the hubs!!


I had them on three of the hubs, but ended up mashing them on removal due to corrosion. Apart from the seal between the hub, brake-disc and wheel, there's not a lot stopping dust and water getting to the hub nut and subsequently the bearing.

View User's Profile View All Posts By User U2U Member
Adamirish

posted on 26/8/15 at 03:12 PM Reply With Quote
There was some in the bearing kit I bought for my mx5. If you are replacing the bearings then buy a bearing kit rather than just the bearing. Failing that, ring mx5 parts. Good to deal with and very knowledgable from my dealings with them. In fact, I know I have a bearing in my garage but unsure if it's a kit or not.





MK Indy 1700 Xflow

View User's Profile View All Posts By User U2U Member
Adamirish

posted on 26/8/15 at 03:27 PM Reply With Quote
Are these the ones?

http://www.mx5parts.co.uk/front-cover-mk1-25-p-1885.html





MK Indy 1700 Xflow

View User's Profile View All Posts By User U2U Member
micksalt

posted on 26/8/15 at 03:55 PM Reply With Quote
quote:
Originally posted by Adamirish
Are these the ones?

http://www.mx5parts.co.uk/front-cover-mk1-25-p-1885.html


Top of the class. How I missed those is beyond me. Thank you very much indeed

View User's Profile View All Posts By User U2U Member
Adamirish

posted on 26/8/15 at 04:09 PM Reply With Quote
quote:
Originally posted by micksalt
quote:
Originally posted by Adamirish
Are these the ones?

http://www.mx5parts.co.uk/front-cover-mk1-25-p-1885.html


Top of the class. How I missed those is beyond me. Thank you very much indeed


No problem at all. Anything mx5 related just ring them, they are very very good at what they do.





MK Indy 1700 Xflow

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.