Chris Leonard
|
| posted on 8/12/03 at 01:01 PM |
|
|
Dolomite Tacho wiring
Can anyone advise how to wire it up?
I think one wire to the points side of the coil - what else?
Cheers Chris
|
|
|
|
|
Peteff
|
| posted on 8/12/03 at 01:58 PM |
|
|
It should need a power in, an earth and a pass through from the coil to carry the impulses. That's the one you mentioned.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
SeaBass
|
| posted on 8/12/03 at 02:01 PM |
|
|
Case needs to be earthed. Lead from the coil to the bullet connection, switched feed to the 'lucar'. Thats how I wired mine.
Some early versions need to be wired in series with the coil as they use an inductive pickup.
Cheers
|
|
|
