GeoffB
|
| posted on 23/7/07 at 07:19 PM |
|
|
Corner Weighting set up £40..!!!
Would this work..?
http://uk.aldi.com/
[Edited on 23/7/07 by GeoffB]
|
|
|
|
|
RazMan
|
| posted on 23/7/07 at 07:37 PM |
|
|
Well the link doesn't 
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
coozer
|
| posted on 23/7/07 at 07:42 PM |
|
|
comes up as http:// only
1972 V8 Jago
1980 Z750
|
|
|
Catpuss
|
| posted on 23/7/07 at 07:45 PM |
|
|
Dunno, do you mean the air con unit or the woman in the shower? 
A you mean the sunday special on scales that can take 180kg?
|
|
|
mark chandler
|
| posted on 23/7/07 at 07:53 PM |
|
|
I collared 4 x ordinary bathroom scales and did my bec, set them up to all read the same with 4 x 25litre drums of water piled on each in turn and
zero'ed at 100kg.
Set some slabs out on my drive and leveled with sand underneath to a bubble in a tube.
Balanced away, even with £4.99 scales they recorded a 5kg difference between front and rear if I leaned forward in the car or sat back so yes they
will work, with 180 kg load should even measure a CEC.
Those are +- 1kg so just get them level.
Regards Mark
[Edited on 23/7/07 by mark chandler]
|
|
|
RazMan
|
| posted on 23/7/07 at 07:53 PM |
|
|
No wubbleyoos
http://www.aldi.co.uk/
They look a bit posh for the garage but at £9.99 thats a pretty good deal. Not for my lardy car though (825kg)
[Edited on 23-7-07 by RazMan]
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
caber
|
| posted on 23/7/07 at 10:02 PM |
|
|
I don't think its those ones they need a tap when unloaded to get them going!
I think they had some old fashioned spring ones listed last week but none at my local store this weekend.
Caber
|
|
|
MikeR
|
| posted on 23/7/07 at 11:18 PM |
|
|
donkeys years ago i bought 8 scales from ASDA for 2.99 each or something. Plan was to corner weigh the car when i completed it. At the current rate
we'll have moved from kg to a new scale by the time i finish
|
|
|
mad-butcher
|
| posted on 24/7/07 at 06:56 AM |
|
|
same here 8 sets from Tesco at 2.99
 
Rescued attachment corner weight setup.JPG
|
|
|
DarrenW
|
| posted on 24/7/07 at 08:44 AM |
|
|
A guy in my town who runs rally cars offered to set mine up inc camber and toe in etc on his fancy gear for £100 cash which i thought was a good deal
for a pro set up.
John Pye, Bishop Auckland.
|
|
|
procomp
|
| posted on 24/7/07 at 10:33 AM |
|
|
Hi as above profesional corner weight setup should cost no more than £30 on it's own.
But obviously not the lowcost method just more accurate.
cheers matt
|
|
|
.JPG)
