carpmart
|
posted on 10/9/09 at 08:24 AM |
|
|
Recomend me a book on basic lathe use!
Hi Chaps
As per the title, is there a book that explains for the layman on how to start using a lathe. Particularly safety aspects and the a 'how to for
dummies'?
ISBN number or an amazon link would be great!
Thanks!
You only live once - make the most of it!
Radical Clubsport, Kwaker motor
'94 MX5 MK1, 1.8
F10 M5 - 600bhp Daily Hack
Range Rover Sport - Wife's Car
Mercedes A class - Son's Car
|
|
|
tegwin
|
posted on 10/9/09 at 08:38 AM |
|
|
I cant answer your question directly... but learning such a thing from a book will be a nightmare...
If you can find someone local to you who knows their stuff... a couple of hours watching the pro you will learn a LOT! Then simply play
------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!
www.verticalhorizonsmedia.tv
|
|
richardlee237
|
posted on 10/9/09 at 08:38 AM |
|
|
the link below will take you to A J Reeves book and publications. The Amateur Lathe is an excellent starter book.
Also buy a set of Zeus engineers tables
A J Reeves linky
Quote Lord Kelvin
“Large increases in cost with questionable increases in performance can be tolerated only in race horses and women.”
Quote Richard Lee
"and cars"
|
|
wheelfelloff
|
posted on 10/9/09 at 08:50 AM |
|
|
quote: Originally posted by carpmart
As per the title, is there a book that explains for the layman on how to start using a lathe. Particularly safety aspects and the a 'how to for
dummies'?
Several "on line"resources that are available and worth a look. This site has a good basic outline of setting up and using a lathe:
http://www.astronomiainumbria.org/advanced_internet_files/meccanica/easyweb.easynet.co.uk/_chrish/techindx.htm
The Boxford "Know Your Lathe" is also an excellent insight into general lathe operations and is available to download here:
http://www.pulse-jets.com/boxford/boxford_know_your_lathe.pdf
The Book i found most useful is the Amateur's Lathe by Sparey and it won't break the bank either:
http://www.amazon.co.uk/Amateurs-Lathe-Lawrence-H-Sparey/dp/0852422881
Best regards
Keith
Couple of references I forgot - must be age
Basic training Manual for lathe operation is here:
http://opensourcemachine.org/files/US%20Army%20machinist%20course%20-%20Lathe%20Operations%20OD1645%20WW.pdf
and a good safety brief is here:
http://its.fvtc.edu/machshop2/safety/safety.htm
Regards Keith
[Edited on 10/9/09 by wheelfelloff]
|
|
robocog
|
posted on 10/9/09 at 08:55 AM |
|
|
Go to library
Get them to order in the Sparey book
"Amatuers Lathe" IIRC
Read, make swarf ;-)
Got a few PDF's here somewhere all zipped up with some good stuff in send me a U2U with your email addy and I'll send either a link to
them or email them to you
There were a couple of other books I borrowed from the library at the same time that were worth reading will try and find out which they wereand get
back to you
Just remember to take chuck key out before starting her up, get into the habit of removing it straight after use, beyond that, always wear goggles and
dont rush and use common sense
(if using a file with it running, make sure the tang of the file has a handle covering it!)
If the swarf is building up, machine off before putting digits anywhere near to clear it, and it can be chuffing sharp (I tend to use a paintbrush by
the machine and just sweep it onto the floor and clear up afterwards)
If the mess was to wrap in the chuck whilst clearing up and fingers were present it could make a nasty mess
- change shoes before going indoors
wear something that stops the swarf getting into shoes, V irritating and distracting
swarf likes fleece tops and is good at getting into pockets- had to strip my phone down a couple of times now to get rid of bits stuck to speakers
magnet making everyone sound like they are talking through a distortion pedalbox
Putting into a placcy bag would save me this problem, but I always forget to either take it out of my pocket or wrap it in one
Regards
Rob
|
|
iank
|
posted on 10/9/09 at 08:55 AM |
|
|
Most important safety tips I can remember from school.
Only ever use a sprung chuck key.
Be aware of your clothing - don't be tempted to wear baggy stuff or ties.
Don't stick your hand in until it stops moving.
Safety glasses
--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous
|
|
DarrenW
|
posted on 10/9/09 at 09:04 AM |
|
|
My old apprentice training manuals are great for this. Wrote by EITB.
Sadly mine arent for sale - too sentimental.
|
|
UncleFista
|
posted on 10/9/09 at 09:14 AM |
|
|
Not a book, but a pretty good website HERE
Tony Bond / UncleFista
Love is like a snowmobile, speeding across the frozen tundra.
Which suddenly flips, pinning you underneath.
At night the ice-weasels come...
|
|
PAULD
|
posted on 10/9/09 at 11:00 AM |
|
|
Turning
As above, the Sparey book is very good. This and everything you'll need for your lathe is available at chronos.co.uk. Sparey designed some model
aircraft engines. Make one of these on your lathe (when the Locosts done) and when it first runs the kick is like your first drive!
|
|
chris.russell
|
posted on 10/9/09 at 01:55 PM |
|
|
Just a word of caution
Years ago, in my distance past i learn't first hand how dangerous lathes are, they are fast and powerful machines that will not give you a
second chance.
A book is good but there is no substute for professional training, try your local college to see if they do an introduction course.
http://locostbuilders.co.uk/viewthread.php?tid=11401
Mines a pint
|
|
carpmart
|
posted on 11/9/09 at 08:36 AM |
|
|
quote: Originally posted by chris.russell
Just a word of caution
Years ago, in my distance past i learn't first hand how dangerous lathes are, they are fast and powerful machines that will not give you a
second chance.
A book is good but there is no substute for professional training, try your local college to see if they do an introduction course.
http://locostbuilders.co.uk/viewthread.php?tid=11401
Thank you for this warning!
I will be very careful!
Have the remainder of your fingers healed OK?
You only live once - make the most of it!
Radical Clubsport, Kwaker motor
'94 MX5 MK1, 1.8
F10 M5 - 600bhp Daily Hack
Range Rover Sport - Wife's Car
Mercedes A class - Son's Car
|
|
flak monkey
|
posted on 11/9/09 at 11:11 AM |
|
|
See if you can pick up copies of the old ITB books. Probably some on ebay.
They are the manuals apprentices used to have back in the day and are brilliant right from basics to quite complex stuff.
Otherwise see if you can spend some time with someone local who is an experienced turner. They will show you all the ins and outs.
Shame you arent a bit closer to me, you would be welcome to come and have a go.
David
Sera
http://www.motosera.com
|
|