tony-devon
|
posted on 5/8/11 at 06:25 PM |
|
|
rear lower wishbone bolt
where do you guys get the big long bolts from, the one that goes through the bottom of the rear upright
I got a kit of bolts and bushes, but stupid people dont seem to differentiate twixt M12 and 1/2"
been to local bolt place and nothing that long in 1/2"
where do you get yours? I have replaced the rest with 1/2" now, was sloppy old fit otherwise LOL
heavy is good, heavy is reliable, and if it breaks, hit them with it
|
|
|
liam.mccaffrey
|
posted on 6/8/11 at 06:32 PM |
|
|
I posted a similar question the other day, linky
Build Blog
Build Photo Album
|
|
tony-devon
|
posted on 6/8/11 at 06:42 PM |
|
|
thanks, the problem I have is that the bolts are about 12-14" long
had a think and it might be easier to just make new crush tubes and modify the uprights LOL
still cant beleive that I got M12 bolts with crush tubes bored 1/2"
rear suspension on mock up so I could move it about, was like a prick in a shirt sleeve
heavy is good, heavy is reliable, and if it breaks, hit them with it
|
|
liam.mccaffrey
|
posted on 7/8/11 at 09:34 AM |
|
|
I am looking for a long half inch bolt to through my rear mx5 uprights (m14). I had to use a 1/2" bolt as my spherical bearings are 1/2".
I had 4 reducing bushes machine to go from 14mm to 1/2". Havene't got the bolts yet though.
Build Blog
Build Photo Album
|
|
Michael
|
posted on 7/8/11 at 08:50 PM |
|
|
http://www.namrick.co.uk/
These are the people I got all my suspension bolts from. I was in the area one day and picked them up, but they also do postage as I got 8 seat belt
bolts from them earlier this year.
My bottom rear shock has a longer bolt.
|
|