St150 engine

Not logged in [Login - Register]

LocostBuilders » Forum » Engine & Transmission » St150 engine

MIG Welders & ARC Welders at MachineMart.co.uk

Printable Version | Subscribe | Add to Favourites

Sschipps

N00bie

Posts 1
Registered 30/5/15
Member Is Offline

Building:

posted on 5/6/15 at 05:41 PM

St150 engine

Hi all, currently have 2.0 pinto in my tiger cat.. Found a st150 engine complete (wiring, Ecu , manifolds) how straight forward / difficult to swap?
Big shopping list or not so much? only looking at this engine beers same way round as me pinto

Thankssss

Mr C

Contributor

Posts 467
Registered 14/7/11
Location Kent
Member Is Offline

Building: up hope it'll be finished soon

posted on 5/6/15 at 07:43 PM

I've not done a conversion as such, though built up a duratec for a mid engine application. I would think you'll need to change a number of parts including sump, bellhousing, and oil filter housing to clear your chassis. Check out Retroford for RWD conversion parts, also Raceline for a sump etc. The standard inlet is a bit pants tbh the throttle body is very restrictive though can be swapped out for a 60mm item. also the standard throttle is motorised so needs to be sorted. Best to throw away the manifold and look towards bike bodies or Jenveys if you can. Allow for a new exhaust as well. As you can imagine the cost can climb pretty quickly though the engines are cheapish to replace if you blow it up and with bodies and a cam swap good for around 200bhp.

All the best whatever you choose to do

Girl walks into a bar and asks for a double entendre, so the barman gave her one

davidimurray

Contributor

Posts 813
Registered 25/1/10
Location South Wales
Member Is Offline

Photo Archive Go!

Building: Haynes Roadster

posted on 5/6/15 at 07:54 PM

Jut done it - some info her - http://locostbuilders.co.uk/viewthread.php?tid=192871

Will be £1k+ and lots to do but worth the grin factor!

ali f27

Contributor

Posts 868
Registered 3/8/08
Location East Cumbria A686 Hartside pass
Member Is Offline

Photo Archive Go!

Building: built f27 hooligan

posted on 6/6/15 at 10:34 AM

Have a look at rwd motorsport most of the parts are priced on their web site lots of time and money on my change were to bringing my car from webber carbs to injection if money is tight how about bike carbs and something simple for spark

LocostBuilders » Forum » Engine & Transmission » St150 engine

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.